Long Handled Pruning Shears

Loppers. Loppers (also known as long-handled pruners) boast long handles so you can extend your reach without having to stretch too far. Like hedge shears, they feature telescopic handles so are fully adjustable.

Why use long reach pruners?

There are many benefits of using long reach pruners. It helps to easily prune twigs, branches, and leaves that are located above your reach. They provide a long reach to let you cut those dry branches that are located high above and far from your reach.

What is the difference between pruners and loppers?

What's the difference between loppers and pruners, and when do you use one or the other? Pruners generally fit in your hand and are used to prune small branches. Loppers are larger tools with long handles that give you more leverage so you can prune (or “lop off”) branches that are larger.

What is the use of long handled shears?

Easy cutting from the ground. Long handled pruners with and without a telescopic handle allow to prune high branches and to trim hard-to-reach areas. With some pruners, the cutting head can be rotated to a specific angle.

What garden shears for thick branches?

Bulldog Wavy Blade Hedge Shears If you've got a lot of thick twigs and stems to cut, it might be worth investigating wavy blade shears. Trapping branches within the curves of the blade, they keep foliage secure so you can slice through them more easily.

What are the two types of pruning shears?

Type of Pruning Shears There two basic types of pruners – bypass pruners and anvil pruners. Bypass Pruners. These are most popular. You get a clean cut from two curved blades that move past each other (hence 'bypass') just like a pair of scissors.

Are Fiskars loppers any good?

These are an excellent pair of loppers that are useful for anyone who needs to cut thicker branches with ease. They are light enough for every day general pruning but have the strength to cut through tough, dense wood too.

How thick a branch can loppers cut?

Loppers are essentially a pair of large, long handled secateurs, capable of taking on stems which would be too thick for even your very best secateurs. Ideal for the autumn and winter pruning period, loppers are designed to cut branches up to around 50mm thick.

What is an anvil pruner best used for?

An anvil pruner can snip away dead twigs and branches up to ½ inch. The wide anvil prevents close cuts, but the jaws won't jam up with wood shards the way a bypass pruner can. Rather than try to work a thick tree shoot into the jaws of a lopper, reach for a folding saw.

What shears for large branches?

Lopping shears, or loppers, are used to cut “larger woody things,” says Leech. “It's like a big pair of hand pruners that you can use for a large-diameter branch.” Morrell recommends Felco's loppers, which have a toothed bypass blade.

What are the three types of shears?

When it comes to cutting fabric, there are three types of shears:

• Dressmaking shears.
• Paper shears.
• Pinking shears.
• Tailor's shears.

What are the uses of long handled tools?

Balance: A longer handle counterbalances the weight of the tool head, making it less fatiguing to use, especially over long periods. Reach: Long-handled tools extend the length of your reach, which has many advantages. Obviously, you can reach farther without moving.

What is the best tool to cut thick tree branches?

Pruning Saw Some tree branches are too thick for conventional loppers and pruners. Big, mature trees usually have branches at least 3 inches in diameter. You're better off using a pruning saw for pruning that requires more effort. A pruning saw is a manual saw with a narrower blade than a conventional wood saw.

What tool is best for cutting branches thicker than 1 in diameter?

A chainsaw provides the cleanest cut when you're dealing with limbs thicker than 3 inches. If your pruning job requires a chainsaw, it's recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are beyond your reach. Most pole pruners cut limbs up to 2 inches in diameter.

Is wd40 good for pruners?

Cleaning alone is not enough for the long life of garden tools, it's important you lubricate them to keep them safe from environmental factors that cause their wear and tear and corrosion. The best product to lubricate garden tools is WD-40® Multi-Use-Product.

Which is better bypass or anvil pruners?

An anvil cut is more powerful than a bypass cut with minimal effort required. Ideal for the powerful pruning of dead wood. Bypass cutting tools have two sharpened blades that pass over each other to make a clean and precise healthy cut in a scissor action.

What are the 4 types of pruning?

There are four different pruning cut types:

• Removal cut (shown at right): large removal cut, do not make flush cuts.
• Reduction cut.
• Heading cut.
• Removing dead branches.

Which is the best type of hand held pruning tool for trees and shrubs?

Pruning shears (or pruners, clippers or secateurs) These are probably the most-used tool when it comes to pruning shrubs, flowers, vines, and small growth on trees. Pruning shears are hand-held and can cut branches and twigs up to ¾ of an inch thick.

Is Fiskars made in China?

Did you know that many of the popular Fiskars products are designed, manufactured and tested in Finland?

What is the difference between a lopper and a bypass lopper?

The tools pictured on the left are known as anvil types, and those on the right are known as bypass types. Anvil pruners and loppers have a blade that closes against an anvil on the lower jaw. The anvil is a softer metal than the blade. Bypass pruners and loppers have a blade that sweeps past the lower jaw.